Prym Tubular Rivets Silver 7.5mm for 3-4mm thickness - 20 pcs

Prym Hulnitter Silver 7,5mm to 3-4mm thickness - 20 pcs are small rivets, which are especially suitable for thicker materials like leather. This makes them perfect for belts and bags made of leather. You can embellish your latest creation or an old bag or belt you think needs a spruce up. The rivets are easy to use and fit materials that are about 3-4 mm thick. They themselves are about 7.5 mm in diameter. In this pack you get 20 hole punches, each consisting of two parts. Whether you have used hole punches before or not, you can easily use these. They are easy to assemble, just follow the instructions below or on the back of the packaging. The tools you need to assemble the hole punches are included.

Prym Hole Pins Silver 7,5mm to 3-4mm thickness - 20 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The hole punches are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned.

Assembly

Prym Hole Pins Silver 7,5mm to 3-4mm thickness - 20 pcs to be assembled with a hammer and the tools provided. A metal rod, a plastic disc and a metal disc are included in the Prym Hole Pins Silver 7,5mm to 3-4mm thickness - 20 pcs. The plastic disc is placed under the material where the hole should be. Place the pointed end of the metal rod where you want the hole. Now tap the rod with a hammer a few times until there is a hole. Poke the larger part of the hole through the material and place the metal disc underneath. Place the smaller part of the hole on top so that the two parts fit together. Tap the top part of the hole a few times with the hammer until the two parts fit together. Your hole punch is now stuck.

Featured patterns

Baby Bib by Rito Krea - Baby Bib Sewing Pattern 24x19cm

Cork Shoulder Bag by Rito Krea - Bag Sewing Pattern 30x22cm

Key Ring made of Leather Straps by Rito Krea - DIY Guide for Key Rings 10 pieces