Prym Non-Sew Press Fasteners Mini Silver 8mm - 10 pcs

If you need small press studs for your latest project, then Prym Press Stud Mini Silver 8mm - 10 pcs is just the thing for you. Here you get 10 mini push buttons of about 8 mm in diameter. The buttons come in silver and therefore have a nice and shiny surface. The outside surface is flat and round. This makes them very neutral in expression. Therefore they are suitable for both boys and girls. The push buttons are easy to take apart and can therefore be used by little people who have to learn how to put on and take off their clothes themselves.

Prym Press studs Mini Silver 8mm - 10 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the spacing of your holes.

There is a step-by-step guide in the pack with assembly pictures for all three ways you can assemble the Prym Push Buttons Mini Silver 8mm - 10 pcs.

Assembly

The Prym Press studs Mini Silver 8mm - 10 pcs consist of two sides which can be closed together. Each side consists of two parts which must be pressed together through each side of the fabric before they can be used. You can see how the 4 parts fit together and should fit during assembly on the back of the packaging and in the video below.

Prym Press studs Mini Silver 8mm - 10 pieces can be assembled in three different ways. You can use pliers at the edges or a tripod in places where pliers can't reach. You can also hammer them in place with the tools provided. A tool and 6 smaller plastic and metal parts are included in the Prym Press studs Mini Silver 8mm - 10 pcs. To make a hole in your fabric, you need two of the metal parts. You put them in the tool and close the tool around the fabric where you want a hole. You now tap the tool with a hammer a few times until there is a hole through the fabric.

Each of the two sides of the push button has two parts for the tool. When you need to put a new side in the fabric, you swap the parts for the correct parts for the next step in the assembly. If you are unsure which parts are which, please refer to the pictures on the back of the packaging.

Place one part of the push button in the tool and insert the push button through the fabric. Place the other part of the push button on top as shown in the video. Close the tool and tap the tool a few times with the hammer until the push button is seated. Remove the tool. Your push button is now stuck.

Repeat the whole process for the other side.

If you have any doubts about the assembly of the Prym Push Buttons Mini Silver 8mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. The tool has a different design in the video, but the assembly is the same. The tools to make the hole and press the buttons together are also different, but the principle is the same with the parts you use instead. In the video, Prym also shows you how to use pliers for assembly. If you are interested in pliers or tripods, you can see our selection here.

EAN: 4002273903602 (4 002273 3903602)