KnitPro Yarn winder to Yarn

The KnitPro wool winder can save you a lot of time. Whether you have yarn in balls or bundles that need to be wound into skeins, or you've just finished a knitting project, a wool winder comes in handy. It can wind up yarn faster than if you had to do it by hand. Yarn skeins wound up by a wool winder are also called a (yarn) cake. They have the added advantage that you can pull the yarn off from both the middle and the outside of the yarn skeins, depending on your preference.

When assembled, the wool winder is 11 cm long, 10 cm wide and 19 cm high. It is made of plastic, which is white and blue. The handle itself is made of blue plastic. The yarn arm with the eye is also made of metal, as is the clamp that holds the wool winder. In addition to the clamp, there is a blue plastic base with a non-slip rubber coating made of raw rubber, so that the edge of the table is protected when you attach the spanner.

The wool winder is easy to assemble and use. The handle is easy to attach to the table top with the metal screw. Be careful not to tighten the clamp too tightly to the table edge. The wool winder can be clamped on table edges up to 5 cm thick. You get a wool winder that is easy to use. KnitPro is known for making quality products with a focus on functionality and durable materials.

Mounting the wool winder for yarn

In the package you will find the wool winder itself, the spindle around which the yarn is wound and an instruction manual in English. The spindle is attached to the rotating shaft by pressing it down onto the shaft and turning the spindle itself anti-clockwise until it is firmly seated. Next, the winder is mounted on a table with the clamp, which is screwed in place. Attach the device to the table by pushing it against the table with the clamp under the edge of the table. Tighten the clamp to the table by turning the screw from right to left, i.e. anti-clockwise. If you want to remove the winder, turn the handle clockwise until the appliance detaches from the edge of the table. Then you just have to pull out the yarn eye itself from the appliance. Now you are ready to wind the yarn on the wool winder.

How to wind yarn cakes on the Wool Winder

You take out your yarn and take one end of the yarn. Now wrap it around the yarn eye on the metal rod. Next, you attach the yarn to the top of the spindle itself, i.e. through the two small slots, so that the yarn is held on the spindle itself. Now wrap the yarn clockwise around the spindle. Hold the yarn from the yarn eye slightly taut while turning the clockwise handle of the wool winder itself with your other hand.