Prym Anorak Non-Sew Press Fasteners Antique Brass 15mm - 10 pcs

If you want to give your bag or outerwear a new look or just need press studs for your latest project, then Prym Anorak Press Stud Antique Brass 15mm - 10 pcs is surely something for you. These press studs come in the colour antique brass, which gives them a rustic look. The snaps are less prominent than those in silver, for example, as they don't shine.

Prym Anorak Press Buttons Antique Brass 15mm - 10 pcs measure approximately 15mm in diameter and you get 10 press buttons in the pack, so you can put press buttons in many or larger projects. The snaps have a medium hold, making them ideal for outerwear.

Assembly is easy, so both beginners and more experienced crafters can easily assemble them. There are quite a few steps and once you've figured out the trick, it's a breeze to put the snaps in. We've made a little guide to fitting below and you can also watch the video to make everything extra clear.

Prym Anorak Press Buttons Antique Brass 15mm - 10 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 60ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the distance of your holes.

There is a step-by-step guide in the pack with pictures for fitting for all three ways you can fit Prym Anorak Push Buttons Antique Brass 15mm - 10 pcs.

Assembly

Each push button in the Prym Anorak Push Buttons Antique Brass 15mm - 10 pcs consists of two sides, which in turn each consist of two parts. The parts must be pressed together through the fabric on each side of the closure before the press stud will function. You can see how the 4 parts fit together and how they should sit during assembly on the back of the packaging, in the instructions or in the video at the bottom of the page.

Prym Anorak Push Buttons Antique Brass 15mm - 10 pcs you can assemble with three different kinds of tools. You can choose to use pliers at the edges and a tripod where the pliers cannot reach. Regardless of location, you can fasten the push buttons with a hammer and the included tools. The Prym Anorak Push Buttons Antique Brass 15mm - 10 pcs includes one tool and 6 smaller parts in plastic and metal.

When making holes in your fabric, use the plastic disc and the short metal rod. Place the disc under the fabric where you want the hole to be. Now insert the metal rod into the tool and place it where the hole should be. Tap the tool a few times with a hammer until there is a hole through the fabric.

There are two parts to the tool for each of the two sides of the press stud. Therefore you have to change the parts of the tool to fit the side you want to put on. You can look at the back of the packaging or in the video below if you are unsure which parts you need for what.

Now place two of the push button parts in the tool and insert the highest part through the fabric. As shown in the video, now press the tool together around the fabric and tap the tool a few times with the hammer so that the push button sits together. Remove the tool because your push button is now stuck together.

Repeat the process for the other side.

Take a look at the video below if you are unsure about the assembly of the Prym Anorak Press Buttons Antique Brass 15mm - 10 pcs. In the video Prym demonstrates the assembly with a hammer and with pliers. If you are interested in the pliers or the tripod, you can see our selection here.

EAN: 4002273902995 (4 002273 3902995)