Paper Star Strips Silver 73cm 25mm Diameter 11.5cm - 100 pcs

Large star strips can be used for various decorative projects. You will find a wide selection of them, which are also cheap star strips. Do you love braided poinsettias, you get this pack of paper strips at a favorable price. You can also use the strips to make baskets, hearts and garlands.

There are 100 pieces of paper strips in the pack. They are made of silver paper and it is acid-free. You get one size of poinsettia with a diameter of 11.5 cm. The paper strips have a width of 25 mm and a length of 73 cm. If you use all the star strips to weave poinsettias, you will get 25 large poinsettias. If you need instructions for braiding the star strips, an illustrated one is included in the pack to show you step by step how to make braided poinsettias. Also find help in our written guide below.

Guide

Follow the illustrated instructions. 1) Start by finding four strips. Then fold them in half, so that the strips are halved. 2) At the end where the strips are not folded, cut a small triangle so that the end is pointed. 3) Take the first strip and place it so that the tip is pointing downwards. 4) The next star strip should now lie crosswise with the tip pointing to the right. Star strip 2 should fold over the first vertical star strip. 5) Now take the third star strip and place it vertically, but opposite to star strip 1, i.e. star strip 3 lies on the table with the point upwards. Strip 3 should fold over strip 2. 6) Now take the last strip and place it across strip 3, pointing to the left. Star strip 4 should wrap around star strip 3 and also have the tips between the two sides of the first strip. 7) When you pull all four strips out to the side, they should lock in place so you have a small square. 8) Next, fold the four strips over the braided square so you have two strips on all four sides. You do this so that you go counterclockwise. The last strip that you fold over should be locked in place by sticking it through the transverse dice in the square. 9) Now bend the top right strip so you have a small triangle with the slanted side pointing to the right. The paper strip points to the right. 10) Now fold another triangle so that the strip points downwards. Now you have two triangles. 11) Now fold one triangle over the first triangle so that they are double. 12) Next you need to get the strip through the transverse strip of the braided square itself in the middle. If necessary, fold the triangle backwards when you need to pass the strip through. 13) Turn the star 90 degrees and repeat steps 9-13, that is, continue folding the triangles that form the points of the star. Once you have folded the first four points, turn the star over. Now repeat folding the triangles into points in the same way as points 9-13. 14) You now have four strips sticking out at the top of the star. Fold them up. Lift up one of them and now fold the paper backwards into a triangle so that the slanted side is pointing upwards. Turn the strip so that the tip can go through the transverse strip at the back of the folded triangle. The strip should go through one of the points on the side. Repeat point 14 on the other three strips. Reverse the star and repeat point 14 four times. 15) Finish folding by cutting the excess strips from the sides of the star.

Specifications

• Star strips Silver 73 cm 25 mm Diameter 11,5 cm - 100 pcs.
• Material: paper
• Length: 73 cm
• Size: 25 mm (width)
• Colour: silver

Featured patterns

Woven Christmas Heart by Rito Krea - Christmas Hearts DIY 22x7cm - 50 pcs