Prym Sport and Camping Non-Sew Press Fasteners Silver 15mm - 10 pcs

Prym Sport and Camping Push Buttons Silver 15mm - 10 pieces are for you who love sports and camping and enjoy making or repairing your own things. If the old push buttons have broken or you want a new push button somewhere there wasn't one before, then Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs can help you. They are easy to use, so anyone can use them.

In this pack you get 10 sets of press studs consisting of 4 pieces for each set. This makes two sides that can be pressed together to keep your items together or closed. Prym Sport and Camping Press Buttons Silver 15mm - 10 pieces are approximately 15 mm in diameter and have a nice silver color. It gives a little play in the overall look.

Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the spacing of your holes.

There is a step-by-step guide in the pack with pictures for fitting for all three ways you can fit Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs.

Mounting

Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs consist of two sides which can be closed together. Each side consists of two parts that must be pressed together on each side of the fabric before they can be used. You can see how the 4 parts fit together and should fit during assembly on the back of the packaging and in the video below.

Prym Sport and Camping Press studs Silver 15mm - 10 pieces can be mounted in three different ways. You can use pliers at the edges or a tripod in places where the pliers can't reach. You can also fasten them with a hammer and the included tools. A tool and 4 smaller parts in plastic and metal are included in the Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs. The short metal rod is to be used together with the black plastic disc to make holes in your fabric with. Place the disc under the fabric where you want the hole to be. Unfold the tool and insert the metal rod into the tool. Place the pointed end where the hole should be. Now hit the tool directly with a hammer a few times until a hole is made.

Take the metal rod out of the tool and put the last two parts in the tool, each in its own hole. Place the tool so that the flat part can lie in the recess of the plastic part. Push the push button through the fabric. Place the other part of the push button on top as shown in the video. Close the tool and tap the tool a few times with the hammer until the push button fits together. Remove the tool. Your push button is now stuck. Repeat for the other side.

If you have any doubts about the assembly of the Prym Sport and Camping Push Buttons Silver 15mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. The tool has a different design in the video, but the assembly is the same. Here Prym also shows you how to use pliers for assembly. If you are interested in pliers or tripods, you can see our range here.

Featured patterns

Baby Bib by Rito Krea - Baby Bib Sewing Pattern 24x19cm

Envelope Purse by Rito Krea - Sewing Pattern Purse 16x11cm

Key Ring made of Leather Straps by Rito Krea - DIY Guide for Key Rings 10 pieces