Prym Eyelets Silver 14mm - 10 pcs

If you need rings for a press ring, your travel bag or a curtain, then Prym Lacing Rings / Sailing Rings Silver 14mm - 10 pieces are just right for you. In this pack you get 10 lace rings, each consisting of two parts. The rings measure approximately 14 mm inside and come in the colour silver. This gives them a nice and shiny look. You can also use them to close a bag or sweater. The closure could consist of a nice ribbon through several rings or a single ring with a button on the opposite part. We suggest for example the beautiful KnitPro Symfonie Classic or Lilac buttons in duffel or oblong shape. They will easily slip through the hole and cannot come back through again.

Prym Lacing Rings / Sailing Rings Silver 14mm - 10 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The rings are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and are dry cleanable.

Assembly

Prym Lacing Rings / Sailing Rings Silver 14mm - 10 pcs you need to assemble with a hammer and the provided tools. A tool and a metal disc are included in the Prym Lacing Rings / Sail Rings Silver 14mm - 10 pcs. The disc is placed under the fabric with the grooves facing upwards, where the hole should be. The tool part B is placed on the fabric where you want a hole. Now tap the tool with a hammer a few times until there is a hole. Turn the disc so that the grooves are now facing downwards and place the larger part of the sail ring in the recess. Push the ring through the fabric. Place the second part of the ring, with the deepest recess downwards, against the fabric around the first part. Place part B of the tool on top of the ring and tap the tool a few times with the hammer until the lacing is tight. Remove the tool. Your lacing is now fixed.

If you have any doubts about the assembly of the Prym Lacing Rings / Sailing Rings Silver 14mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. In the video part A is used to make the holes and part B to press the ring together. Here you use part B for both instead. Also, the disc in the video is plastic, where here it is metal.

EAN: 4002275413833 (4 002275 5413833)