Prym Revolving Punch Pliers 6 sizes 2.5-5mm

Prym Hole Pliers for 6 hole sizes 2,5-5mm are for you who need to tighten your belt longer and therefore need to make some extra holes. The Prym hole punch is ideal for leather and can make holes in 6 different sizes. This means you can make the holes exactly the size you need.

Prym Hole Pliers for 6 hole sizes 2,5-5mm can be used for a wide range of projects. For example, it can make holes in leather, paper and plastic film. This means that whatever your project, the Prym Hole Pliers for 6 hole sizes 2.5-5mm will make a good number of holes. For example, you can make holes in homemade cards, your new belt or a task strap. You can also use it to make holes in which you can put hole rivets, press studs or small laces.

The pliers are shaped like pliers with a wheel on one arm and a small metal plate on the other. The wheel has 6 spikes on it in different sizes. These are the ones you use to make holes when you squeeze the pliers.

The hole punch can make holes in sizes from 2.5 to 5.0 mm. There are 6 sizes. This means that you can make holes in sizes 2.5 mm, 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm and 5.0 mm. You can measure the size on the packaging. You change the size by turning the wheel in the direction of the arrow.

You use the Prym Hole Pliers for 6 hole sizes 2,5-5mm by turning the wheel to the size hole you want. Next, place the hole punch over the material and let the right pin touch the spot where the hole should be. When you are sure of the position, press together so that the spike presses against the small round metal plate on the hole punch. You have now made your hole and can release the pressure.

On the back of the packaging, you'll find easy instructions on how to use the pliers, should you have any doubts.

Specifications

• Prym hole punch for 6 hole sizes 2,5-5mm
• Material: metal and plastic
• Sizes: 2,5 mm, 3,0 mm, 3,5 mm, 4,0 mm, 4,5 mm and 5,0 mm