Prym Jersey Non-Sew Press Fasteners Ring Silver 10mm - 10 pcs

If you need press studs on your new baby's homemade bodysuit, blouse or trousers, then Prym Jersey Press Stud Ring Silver 10mm - 10 pcs is just the thing for you. The buttons are easy to use once you have learned the technique. Anyone can join in after watching the video from Prym on how to fit the press studs. They can be used on a wide range of projects. The press studs are also perfect for use on children's clothing as they are easy for young children to undo and put on themselves. They can also be used on gloves, for example, which can be difficult to get on when they need to fit snugly around the wrist and not fall off when children are out playing.

In this pack you get 10 sets of round snap fasteners with top and bottom. They come in the colour silver and measure approximately 10mm in diameter. If you need additional snaps and of course already have the tools, you have the option to buy refill packs here.

The Prym Jersey Snap Ring Silver 10mm - 10 pieces are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the distance of your holes.

Assembly

The Prym Jersey Snap Ring Silver 10mm - 10 pieces consist of two sides that can be closed together. Each side consists of two parts that need to be pressed together on each side of the fabric before they can be used. In each side you will need one of the parts with tacks. The other two parts must be used on either side so that they can be pressed together. It is therefore important that the two parts face each other when you have pressed all the parts onto the fabric.

Prym Jersey Press studs Ring Silver 10mm - 10 pieces can be mounted in three different ways. You can use pliers at the edges or a tripod in places where the pliers cannot reach. You can also hammer them in place with the tools provided. A tool and 2 smaller plastic parts are included in the Prym Jersey Snap Ring Silver 10mm - 10 pcs. The two plastic parts are inserted into the tool on either side. Place the parts for the jersey press studs in the tool as indicated on the packaging or in the video below. Close the tool around the fabric and tap the tool a few times with the hammer until the snap is seated. Remove the tool. Your press stud is now stuck. Repeat for the other side.

If you have any doubts about the assembly of the Prym Jersey Snap Ring Silver 10mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. The tool has a different design in the video, but the assembly is the same. Here Prym also shows you how to use pliers for assembly. If you are interested in pliers or tripods, you can see our range here.

EAN: 4002273901073 (4 002273 3901073)