Prym Anorak Non-Sew Press Fasteners Silver 12mm - 10 pcs

If you need new press studs in your jacket, coat or down vest, then Prym Anorak Press Stud Silver 12mm - 10 pcs is ideal for you. Press studs are great for outerwear as they are quick to button and give a neutral look. Prym Anorak Press Buttons Silver 12mm - 10 pcs have a medium hold, making them perfect for outerwear and the like. They measure approximately 12mm in diameter and you get 10 press studs, each consisting of 4 pieces. The press studs come in the colour silver, which gives them a shiny finish that looks great with all kinds of outerwear. With Prym Anorak Press Buttons Silver 12mm - 10 pcs you can give your old jacket new press buttons.

Prym Anorak Press Buttons Silver 12mm - 10 pcs are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 95ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the distance of your holes.

There is a step-by-step guide in the pack with assembly pictures for all three ways you can assemble Prym Anorak Press Buttons Silver 12mm - 10 pcs.

Assembly

The Prym Anorak Press studs Silver 12mm - 10 pcs consist of two sides which can be closed together. Each side consists of two parts which must be pressed together through each side of the fabric before they can be used. You can see how the 4 parts hang together and should fit during assembly on the back of the packaging, in the instructions and in the video below.

Prym Anorak Press studs Silver 12mm - 10 pieces can be assembled in three different ways. You can use pliers at the edges or a tripod in places where the pliers can't reach. You can also fasten them with a hammer and the included tools. A tool and 6 smaller parts in plastic and metal are included in the Prym Anorak Push Buttons Silver 12mm - 10 pcs.

To make holes in your fabric, use the short metal rod and the plastic disc. You insert the metal rod into the tool and place the disc under the fabric where you want a hole. Then place the metal rod where you want the hole and tap the tool with a hammer a few times until there is a hole through the fabric.

Each of the two sides of the push button has two parts for the tool. When you need to put a new side in the fabric, you swap the parts for the correct ones for the next step in the assembly. If you are unsure which parts are which, please refer to the pictures on the back of the packaging or to the video below.

Place the push button parts in the tool and insert the push button through the fabric. Press the tool together around the fabric as shown in the video. Tap the tool a few times with the hammer until the push button is seated together. Remove the tool. Your push button is now stuck.

Repeat the whole process for the other side.

If you have any doubts about the assembly of the Prym Anorak Press Buttons Silver 12mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. In the video, Prym also shows you how to use pliers for assembly. If you are interested in pliers or tripods, you can see our selection here.

EAN: 4002273903305 (4 002273 3903305)