Prym Sport and Camping Non-Sew Press Fasteners Black Oxyd. 15mm - 10 pcs

If you need new press studs in your jacket, coat or vest, then Prym Sport and Camping Press Stud Black Oxyd. 15mm - 10 pcs just for you. The press studs are easy to use for those who have tried press studs before and those who have never fitted a press stud before. You can use them for young and old as well as for men, women and children. So they're suitable for the whole family. The black buttons are also good on hunting clothes, for example, where they don't light up or catch reflections of light. Of course, they are also good for sportswear and camping equipment, such as bags, blankets or other fabrics that need to be held together.

In this pack you get 10 press studs, each consisting of 4 parts. The snaps are approximately 15 mm in diameter and come in the colour black oxide.

Prym Sport and Camping Press studs Black Oxide. 15mm - 10 pieces are made of stainless brass. This makes them durable in all kinds of weather and for all kinds of projects. The press studs are machine washable up to 60ºC and can be tumble dried up to 80ºC. They can also be ironed on medium heat and dry cleaned. There's a handy ruler on the inside of the tool so you can easily measure the distance of your holes.

There is a step-by-step guide in the pack with pictures for fitting for all three ways you can fit Prym Sport and Camping Push Buttons Black Oxide. 15mm - 10 pcs.

Mounting

Prym Sport and Camping Push Buttons Black Oxyd. 15mm - 10 pcs consists of two sides which can be closed together. Each side consists of two parts that must be pressed together on each side of the fabric before they can be used. You can see how the 4 parts fit together and should fit during assembly on the back of the packaging and in the video below.

Prym Sport and Camping Push Buttons Black Oxyd. 15mm - 10 pieces can be mounted in three different ways. You can use pliers at the edges or a tripod in places where the pliers can't reach. You can also hammer them into place with the tools provided. A tool and 4 smaller plastic and metal parts are included in the Prym Sport and Camping Push Buttons Black Oxide. 15mm - 10 pcs The short metal rod is to be used together with the black plastic disc to make holes in your fabric. Place the disc under the fabric where you want the hole to be. Unfold the tool and insert the metal rod into the tool. Place the pointed end where the hole should be. Now hit the tool directly with a hammer a few times until a hole is made.

Take the metal rod out of the tool and put the last two parts in the tool, each in its own hole. Place the tool so that the flat part can lie in the recess of the plastic part. Push the push button through the fabric. Place the other part of the push button on top as shown in the video. Close the tool and tap the tool a few times with the hammer until the push button fits together. Remove the tool. Your push button is now stuck. Repeat for the other side.

If you have any doubts about the assembly of thePrym Sport and Camping Push Buttons Black Oxide. 15mm - 10 pcs, you can watch the video below where Prym demonstrates the assembly. The tool has a different design in the video, but the assembly is the same. Here Prym also shows you how to use pliers for assembly. If you are interested in pliers or tripods, you can see our range here.

EAN: 4002273902001 (4 002273 3902001)