Infinity Hearts Umbrella Swift Yarn Winder Wood Dia. 20x65cm

The Infinity Hearts yarn winder can fulfil two purposes. If you have yarn that you want to wind up in a skein, the yarn winder can be used to your advantage. This prevents the yarn from tangling. At the same time, it can also be used to hold a ball of yarn while you wind up a ball on a wool winder (sold separately). The yarn winder is easy to use.

It comes in a cardboard box measuring 44 x 6.4 x 5 cm. Fully extended, the device measures 50 cm in height and has a diameter of up to 71 cm. It measures approximately 60 cm in diameter where the yarn is held taut. In addition, there is approximately 17 cm under the table edge. The yarn winder is made of light wood. The device unfolds like an umbrella and keeps the yarn stretched out while you wind it up. It can be used with all types of yarn. At the bottom of the yarn winder is a burnt Infinity Hearts logo. If you need instructions on how to assemble and use it, follow the tutorial below.

Instructions for the Infinity Hearts Wooden Yarn Winder

Once you have unpacked the yarn winder, first loosen the screw in the side slightly. Then you can more easily extend the clamp that will secure the yarn winder to a table. Once the clamp can expand, tighten the screw again. Then mount the clamp to the table by turning the screw to the right, i.e. clockwise to clamp it.

If you want to use the yarn thread to hold your thread while you wind a key on a wool winder, you can use the following instructions. Unwrap your yarn so that it is a large round ring and put the yarn around the device. Unwind the thread so that the yarn is slightly taut. To do this, take hold of the clip at the bottom of the machine, squeeze the clip and push it upwards to expand the thread. Remember to loosen the threads that hold the yarn in place, and you're ready to wind the thread. Find the yarn end and attach it to the wool winder. Now you can start making your yarn skein.